AED Automated External Defibrillator Nite-Glo Signs
An AED photoluminescent sign identifies where an automated external defibrillator is kept, helping staff, visitors and emergency responders find lifesaving equipment without delay. It is used indoors on walls, doors or nearby AED cabinets, where clear first aid identification still matters if normal lighting drops or fails.
Where This AED Sign Works Best
Install this sign at the AED itself and on the approach to it, especially where the cabinet sits inside a first aid room, on a corridor wall or beside a door that is not obvious at first glance. Position it at normal eye level so people moving quickly can recognise the defibrillator location without stopping to search.
Viewing Distance Guidance
This 100 x 250 mm landscape format suits short to medium indoor viewing distances, such as corridors, room entrances and cabinet positions where people are already close to the equipment. For longer approach routes or wider open spaces, add larger or projecting signs so the AED location is seen sooner.
What This Sign Improves Once Fitted
When this AED sign is placed properly, people spend less time searching and more time reaching the defibrillator. That matters most in shared buildings where the equipment may be available but not instantly visible from the main approach route.
- ✅ Faster recognition of the AED position in low-light indoor conditions
- ✅ Clearer first aid wayfinding for staff, contractors and visitors
- ✅ Reduced delay when urgent access to the defibrillator is needed
AED Sign Technical Details
- Sign message: AED Automated External Defibrillator
- EN ISO 7010 Code: E010
- Conforms to EN ISO 7010
- Conforms to BS 5499 sign regulations
- Sign type: First aid
- Sign type: Safe condition
- Orientation: Landscape
- Shape: Rectangle
- Size: H 100 x W 250 mm
- Materials: Adhesive Rigid Plastic, Polyester
- Finish: Film glows brightly in darkness
- Photoluminescent
- Photoluminescence Class: Class B
- PSPA Class B
- Non-reflective
- Display area: Indoors
- Supplied in single
- Material thickness: various
- Background colours: Green/White
- Text colour: White
- Symbols colour: White
- Pictogram symbol: First aid cross
- Pictogram symbol: Heart restarter
- Fitting methods: Wall, door or AED cabinet mount
- Adhesive Rigid Plastic: adhesive backing
- Polyester: self-adhesive back
- Recharge time: 5 minutes
Choosing the Right AED Sign Installation
- ❌ Fitting the sign only on the cabinet when the AED cannot be seen from the approach route
- ❌ Mounting it too low, behind furniture or beside visual clutter
- ❌ Assuming one locator sign will guide people through a larger building
- ❌ Do not rely on this single flat sign for long corridors or turning routes
- ❌ Do not choose it as the only marker in open areas where the AED sits far away
- ❌ Do not use indoor adhesive materials where the surface is unsuitable or exposed to harsher conditions
- ✅ Use polyester or adhesive rigid plastic on smooth indoor surfaces needing quick clean installation
- ✅ Place one sign at the AED and another earlier on the route if first-time visitors may need guidance
- ✅ Upgrade to larger or projecting formats where sightlines are broken or viewing distances are longer
AED Automated External Defibrillator Nite-Glo Signs Questions Answered
What is this AED sign used for? It marks the location of an automated external defibrillator so people can identify the equipment quickly in an emergency, rather than wasting time looking from room to room.
Where should this type of AED sign be fitted? Fit it directly at the cabinet or storage point, and also on the approach route if the defibrillator is not immediately visible from the main walkway or entrance.
When is a photoluminescent AED sign a better choice than a standard sign? It is a better choice indoors where lighting could drop during an emergency, or where you want the AED position to remain easier to spot in darker conditions.
Can I mount this sign on a door or cabinet? Yes, this format is suited to wall mounting, door mounting and AED cabinet mounting, provided the surface is clean, visible and appropriate for the material selected.
Would this sign be enough on its own? It is enough when the defibrillator is close and clearly within sight. If the unit is around a corner, further down a corridor or inside a larger building, add extra directional or projecting signs as well.
Why This AED Nite-Glo Sign Helps You Choose
- ✓ Photoluminescent face glows after brief light exposure
- ✓ EN ISO 7010 E010 symbol supports recognisable AED wayfinding
- ✓ Adhesive-backed material options simplify indoor fitting
- ✓ Compact 100 x 250 mm landscape format suits doors and cabinets
- ✓ Helps people locate the defibrillator quickly when urgency is high
- ✓ Stays easier to identify if normal lighting is reduced or lost
- ✓ Makes first aid provision clearer for staff, visitors and contractors
- ✓ Gives buyers a practical indoor locator sign without unnecessary bulk