We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Dry Powder Fire Extinguisher Nite-Glo Signs
£6.50
In stock
SKU
FR026AAPLV*
Dry Powder Fire Extinguisher Nite-Glo Identification Signs help responsible persons, staff and visitors recognise powder extinguishers in low-light workplaces, so the correct fire equipment is selected faster and with less hesitation.
A Dry Powder Fire Extinguisher Nite-Glo Identification Sign shows the extinguisher type and permitted uses, helping staff, contractors and visitors act faster near fire points, plant rooms, stores and workshops when lighting drops or urgency makes clear guidance essential.
Where This Sign Works Best
You should install this sign directly above or beside the matching dry powder extinguisher, especially where lighting may fail, aisles are busy or several extinguisher types are nearby. Visibility matters because people should not have to read a cylinder under pressure.
Viewing Distance Guide
At H 300 x W 100mm, this sign suits close-range decisions at around 1–3 metres. In longer corridors or larger stores, repeat the sign at each powder extinguisher point rather than expecting one small sign to serve a wide area.
| Size option | Practical reading range | Best placement |
|---|---|---|
| H 300 x W 100mm | Approx. 1–3 metres | Above or behind the dry powder extinguisher |
Expected Safety Outcomes After Installation
Once installed correctly, this sign helps people stop, check and choose more carefully. The main behaviour change is simple: the extinguisher type and use guidance are seen before someone lifts the wrong unit.
✅ Faster recognition of dry powder extinguishers in low-light fire equipment areas.
✅ Better separation between powder, CO2, foam and water extinguishers when different units sit close together.
✅ Less hesitation for trained staff, contractors and visitors who need quick use guidance during early response.
- Purpose: identify dry powder extinguisher type
- User: staff, contractors, visitors, fire wardens
- Environment: low-light workplaces and fire equipment areas
- Where to use: fire points, workshops, plant rooms, stores
- Risk addressed: wrong extinguisher selection in poor light
- Outcome: quicker equipment recognition
- Sign type: dry powder fire extinguisher identification
- Sign message: “Dry powder”
- Sign message: “For use on”
- Use wording: “Wood, paper and textiles.”
- Use wording: “Flammable liquid.”
- Use wording: “Gaseous fires”
- Use wording: “Live electrical equipment.”
- Application: wall or extinguisher stand identification
- Best set near the actual extinguisher location
- Not a replacement for extinguisher training
- Designed for quick visual identification
- EN ISO 7010 code: F001
- ISO pictogram: fire extinguisher
- Additional pictogram: flame graphic
- Pictogram symbol: Class A use
- Pictogram symbol: Class B use
- Pictogram symbol: Class C use
- Pictogram symbol: live electrical equipment
- Conforms to EN ISO 7010 where F001 is used
- Supports BS 5499 fire safety sign guidance
- Supports UK Safety Signs and Signals Regulations
- Conformity: PSPA Class B
- Conformity: DIN requirements
- Conformity: IMO requirements
- Conformity: British Standard requirements
- No ISO 7010 code claimed for A/B/C use icons
- Colours support fire equipment identification
- For competent-person fire safety layouts
- Material options: Rigid Plastic, Polyester
- Material thickness: 1.2mm
- Size: H 300 x W 100mm
- Orientation: portrait
- Shape: rectangle
- Background colour: red/green/blue
- Text colour: white
- Symbols colour: white
- Finish: photoluminescent film applied
- Photoluminescent
- Non-reflective
- Supplied as a single sign
- Fitting: wall mount or extinguisher stand mount
- Fixings: Rigid Plastic fixing materials not included
- Fixings: Polyester has self-adhesive backing
- Display area: indoors/outdoors
- Recharge: 5 minutes in normal lighting; 6hrs+ illumination
Installation Guidance
❌ Fitting Errors That Cause Confusion
❌ Mounting it where the extinguisher hides it leaves people searching when speed matters.
❌ Placing one sign between different extinguisher types can send someone to the wrong unit.
❌ Applying Polyester to dusty brick, damp paint or oily surfaces can weaken adhesion.
❌ Where It Should Not Work Alone
❌ Do not use it as a substitute for extinguisher servicing, siting or staff instruction.
❌ Do not use it for CO2, foam, water or wet chemical extinguishers.
❌ Do not rely on one small sign for a long corridor, cluttered store or multi-risk area.
✅ Best Practice On Site
✅ Install directly above or behind the matching dry powder extinguisher at normal approach height.
✅ Clean and dry the fixing surface first, then use screws or adhesive suited to the material.
✅ Check visibility during routine fire equipment inspections, including low-light conditions.
Frequently Asked Questions
Are Dry Powder Fire Extinguisher Nite-Glo Identification Signs right for my powder extinguishers? Yes, use them where you need clear dry powder identification and quick use guidance beside the matching extinguisher.
Does this mean dry powder should be used on every fire? No. It shows the intended use guidance for the extinguisher type, but your fire risk assessment, staff training and extinguisher rating still matter.
Is this useful if my building already has lighting? Yes. Nite-Glo is most useful when lighting is reduced, interrupted or obscured by smoke, racking, machinery or evening working.
Should I choose Rigid Plastic or Polyester? Choose Rigid Plastic for a firmer wall-mounted sign. Choose Polyester when you need a thinner self-adhesive option on a clean, smooth surface.
Can I use one sign between several extinguisher types? You should not. Fit the sign to the matching dry powder extinguisher point so nobody connects the message with the wrong cylinder.
Can this replace fire extinguisher training? No. It supports fast identification, but trained users still need to understand safe use, evacuation priorities and when not to tackle a fire.
Features and Benefits
Features
- ✓ Nite-Glo surface supports visibility after light exposure.
- ✓ Vertical layout combines extinguisher type and use guidance.
- ✓ Colour-coded powder panel helps separate it from other units.
- ✓ Material choice suits permanent or adhesive fixing.
Benefits
- ✓ Helps people choose with less hesitation.
- ✓ Improves recognition during power loss or dim conditions.
- ✓ Reduces reliance on memory during early fire response.
- ✓ Gives you a cleaner, more consistent fire equipment setup.
Helpful powder identification formats to review
For a shorter ID-style wording, compare dry powder Nite-Glo I.D. signs where the message needs to stay compact. Useful near grouped fire equipment.
If polyester is the preferred finish, choose Nite-Glo polyester powder extinguisher signs for consistent low-light recognition. Good for shared access routes.
For a smarter rigid option, look at powder extinguisher photo-luminescent acrylic signs in high-visibility fire safety areas. Suitable where appearance matters as well as clarity.
You can compare further through the powder fire extinguisher signage range. Helpful when specifying several building locations at once.
Estimated Delivery Day
Current date and time:
Estimated delivery by:
Based on an estimated 3 working day delivery timeframe from today, excluding weekends and bank holidays. Delivery dates are provided as a guide only and may vary depending on the product ordered, stock availability at the time of purchase, production or printing lead times.