We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Danger Demolition Work In Progress Construction Site Signs
£10.99
In stock
SKU
MM096BE*
Multi-message Demolition Work In Progress safety sign for contractors, visitors and pedestrians at active worksites, helping you control access, PPE use and overhead load risk.
This Demolition Work In Progress safety sign gives you one clear site entrance message for live construction or demolition areas. It warns visitors, parents, contractors and delivery drivers about access restrictions, PPE rules and overhead load risks before they step inside.
Where Demolition Site Safety Signs Should Be Positioned
You should install this sign at main site entrances, perimeter gates, temporary fencing and pedestrian approach points where people decide whether to enter. Position it before the hazard area so the demolition warning, access restriction and PPE instructions are seen early.
Choosing a Practical Viewing Distance
Use the smaller sizes for close pedestrian approaches and the larger options where drivers, contractors or passing visitors need to read the message from further away across site entrances or wide access routes.
| Size | Best viewing use | Typical distance |
|---|---|---|
| H 300 x W 400 mm | Close foot traffic and narrow access points | Up to 4 metres |
| H 450 x W 600 mm | General pedestrian site entrances | Around 6 metres |
| H 600 x W 800 mm | Wider gates and contractor access routes | Around 8 metres |
| H 900 x W 1200 mm | Large perimeters, vehicle approaches and busy sites | Around 12 metres |
What This Sign Helps Change On Site
Once installed at the right approach point, this sign helps you slow people down, stop unauthorised entry and reinforce the PPE rules needed before anyone crosses into an active demolition environment.
✅ Fewer visitors walk into restricted demolition areas without checking site rules first.
✅ Contractors are reminded to wear the correct PPE before reaching the work face.
✅ Overhead load risks are highlighted before pedestrians enter lifting or drop-risk areas.
Technical Details For This Demolition Safety Sign
- Multi-message construction safety sign
- Sign type: warning, prohibition and mandatory
- Shape: landscape rectangle
- Display area: indoor and outdoor use
- Materials: fluted polypropylene, rigid plastic or self-adhesive vinyl
- Finish: glossy film surface
- Non-photoluminescent finish
- Non-reflective face
- Conforms to EN ISO 7010
- EN ISO 7010 codes: W001, W015, P006, M003, M008, M014, M015
- Conforms to BS 5499 sign regulations
- Warning symbols: general warning and overhead load
- Prohibition symbol: no admittance for unauthorised personnel
- Mandatory symbols: ear protection, hard hat, footwear and high visibility clothing
- Background colours: yellow, red, blue and white
- Text colours: black and white
- Symbols colour: black, red and white
- Size options: H 300 x W 400 mm, H 450 x W 600 mm, H 600 x W 800 mm, H 900 x W 1200 mm
- Orientation: landscape
- Supplied as a single sign
- Material thickness: varies by material choice
- Fixing: vinyl has adhesive backing
- Fixing: fluted polypropylene suits cable ties
- Sign messages: “SITE SAFETY” “Construction work in progress” “Parents are advised to warn children of the dangers of entering this site” “No admittance for unauthorised personnel” “This is a hard hat area” “Protective footwear must be worn” “Danger Demolition work in progress” “Use ear protectors” “High visibility jackets must be worn” “Warning Look out for overhead loads”
Fitting Choices That Make This Demolition Sign Work Properly
❌ Placement errors to avoid
- ❌ Do not place it behind open gates where it disappears during working hours.
- ❌ Do not mount it too low where parked vehicles or materials hide the message.
- ❌ Do not rely on one sign if the site has several separate public approach points.
❌ Where this sign is not enough
- ❌ Do not use it as a substitute for physical barriers around demolition works.
- ❌ Do not use the non-reflective version where night-time vehicle approach visibility is needed.
- ❌ Do not use it alone for asbestos, electrical isolation or confined-space hazards.
✅ Better installation choices
- ✅ Fit it at eye level on the approach side of fencing, gates or access doors.
- ✅ Choose the larger sizes where drivers or visitors need more reading time.
- ✅ Check it weekly so dirt, weather damage or site changes do not weaken the message.
Demolition Work In Progress Safety Sign questions answered
What is this sign used for? It is used to warn people that demolition work is taking place while also showing access restrictions and required PPE before entry.
Is this better than using separate PPE and warning signs? It can be better at main entrances because one sign gives visitors the key rules in one place, reducing missed instructions.
Where should I place it on a demolition site? Install it at gates, temporary fencing, hoarding lines, contractor entrances and pedestrian approach points before people reach the active work area.
Which material should I choose? Use vinyl for smooth indoor surfaces, rigid plastic for fixed walls or doors and fluted polypropylene for temporary fencing or cable-tie fixing.
Does it cover all site safety requirements? No. It covers key demolition, access and PPE messages, but you should add task-specific signs where separate hazards exist.
Demolition Work In Progress Sign Features And Site Benefits
Features
- ✓ Combines demolition warning, access control and PPE instructions
- ✓ Uses recognised safety colours for fast message separation
- ✓ Includes warning, prohibition and mandatory pictograms
- ✓ Available in four sizes and three material choices
Benefits
- ✓ Helps you reduce unclear instructions at busy site entrances
- ✓ Supports safer first decisions from visitors and contractors
- ✓ Makes PPE expectations clear before people reach live work
- ✓ Lets you match durability and size to the actual site layout
Supporting signs for demolition, works access and site danger
For active works outside demolition areas, use construction work in progress signs where contractors, plant and materials are moving. They help identify live work without relying on a demolition-specific message.
Where access must be stopped at the boundary, add danger construction site keep out signs to fencing and temporary gates. This reinforces the risk before people enter the works area.
If falling materials are a concern, compare with falling objects warning signs around scaffolds, façades and overhead activity. It gives a more specific message where debris may fall.
For restricted areas created by demolition activity, choose hazard area do not enter signs at exclusion points. They help keep unauthorised people away from changing risks.
To compare more high-risk site notices, browse site danger and hazard warning signs for demolition, construction and restricted area control. This helps you cover the full work area properly.
Estimated Delivery Day
Current date and time:
Estimated delivery by:
Based on an estimated 3 working day delivery timeframe from today, excluding weekends and bank holidays. Delivery dates are provided as a guide only and may vary depending on the product ordered, stock availability at the time of purchase, production or printing lead times.