We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Dry Powder Fire Extinguisher Pack Of 6 Signs
£27.99
In stock
SKU
6FR026AASAV*
Dry Powder Fire Extinguisher Pack Of 6 Signs help you identify dry powder extinguishers across workplaces, stores, workshops and site fire points, giving staff and visitors clearer choice in an emergency.
Dry Powder Fire Extinguisher Pack Of 6 Signs identify dry powder units and show the main fire classes they are intended for. They help you fit consistent guidance across workplaces, warehouses, workshops and site fire points, reducing confusion when a fast extinguisher choice matters.
Best Places To Fit These Dry Powder Signs
You should install these signs directly above, behind or beside dry powder extinguishers, including wall stations and extinguisher stands. Visibility matters because a person under pressure needs to confirm the extinguisher type before they lift it, not after they reach the fire.
Viewing Distance Guidance
Use viewing distance as a practical check: can the dry powder header and fire-class panels be read before someone reaches the extinguisher? For this narrow portrait format, keep the approach line clear and test it from normal walking routes at around 1–5 metres.
| Size option | Practical viewing use | Typical position |
|---|---|---|
| H 300 x W 100mm | Around 1–5 metres on approach | Wall or extinguisher stand |
What Should Improve Once Fitted
Once fitted, the pack helps you standardise dry powder identification across several fire points. The real gain is behaviour: staff pause less, compare extinguishers faster and are less likely to use the wrong unit for the fire risk in front of them.
✅ Quicker recognition of dry powder extinguishers at shared fire points.
✅ Fewer mixed messages where several extinguisher types sit together.
✅ Easier visual checks during inspections, audits and site walk-rounds.
- Purpose: identify a dry powder extinguisher and its safe use range
- Sign message: “Dry powder”
- Sign message: “For use on”
- Sign message: “Class A Wood, Paper, Textiles etc.”
- Sign message: “Class B Flammable Liquids”
- Sign message: “Class C Gaseous Fires”
- Sign message: “Live Electrical Equipment”
- Pictogram symbols: extinguisher, flame, Class A, Class B, Class C, electrical flash
- EN ISO 7010 code: F001 Fire extinguisher symbol
- Standard alignment: conforms to EN ISO 7010 where applicable
- BS standard: designed in line with BS 5499 fire safety sign guidance
- Product type: dry powder fire extinguisher identification sign
- Pack quantity: supplied in packs of 6
- Size: H 300 x W 100mm
- Shape: rectangle
- Orientation: portrait
- Finish: glossy film surface
- Visibility: non-photoluminescent
- Reflectivity: non-reflective
- Material options: Rigid Plastic, Vinyl, Adhesive Rigid Plastic
- Material thickness: depends on chosen material
- Background colours: red, green and blue
- Text colour: white
- Symbols colour: white
- Where to use: indoor and outdoor extinguisher points
- Fitting methods: wall mount or dry powder fire extinguisher stand mount
- Fixings: Rigid Plastic none included; Vinyl and Adhesive Rigid Plastic self-adhesive
Installation Guidance
Errors That Cause Hesitation
❌ Fitting the sign behind stored goods where it cannot be seen on approach.
❌ Placing it too low so the extinguisher body hides the use information.
❌ Mixing this dry powder sign with a different extinguisher type below it.
❌ Applying adhesive material to dusty, damp or flaking surfaces.
When This Is The Wrong Fit
❌ Do not use it for foam, water, CO2 or wet chemical extinguishers.
❌ Do not rely on it as a substitute for staff instruction or fire procedure.
❌ Do not choose this non-glow version for areas that need low-light visibility.
❌ Do not fit it where doors, stock cages or parked vehicles block the sight line.
What Good Fitting Looks Like
✅ Position it directly above, behind or beside the dry powder extinguisher.
✅ Keep the sign readable from the normal approach route at around 1–5 metres.
✅ Clean and dry the surface before fitting adhesive material.
✅ Replace the sign immediately if the extinguisher type changes.
Frequently asked questions
Is the Dry Powder Fire Extinguisher Pack Of 6 Signs right for every extinguisher point? No. Use it only where the extinguisher is dry powder. Foam, water, CO2 and wet chemical units need their own correct identification sign.
Why buy six instead of single signs? A pack suits sites with several dry powder extinguishers, replacement needs or repeated fire points where you want the same message throughout.
Can I fit these to extinguisher stands? Yes, provided the stand surface is clean, stable and large enough for the sign to sit flat without covering key extinguisher information.
Is this suitable for dark corridors or power-failure routes? This version is non-photoluminescent. For low-light areas, choose a glow version so the sign remains easier to see when lighting drops.
Does the sign mean anyone can use the extinguisher? No. It helps with identification, but your fire risk assessment, staff training and site procedure still decide who should attempt first-stage firefighting.
Features and Benefits
Features
- Matched pack helps you fit several extinguisher points in one order.
- Colour-coded use information separates dry powder from other extinguisher types.
- Combined pictogram and text layout can be understood quickly under pressure.
- Material choices suit flat walls, clean indoor surfaces and extinguisher stands.
Benefits
- Helps staff choose dry powder for the right fire classes rather than guessing.
- Reduces mixed or missing identification at multi-extinguisher locations.
- Supports faster checks during routine fire safety inspections.
- Gives contractors and visitors clearer instruction before a small fire escalates.
Bulk dry powder extinguisher sign comparisons
For single-position fitting, choose individual dry powder extinguisher signs where only one fire point needs marking. Useful for small premises or targeted replacements.
If you need to show an empty position, compare powder extinguisher missing signs for inspection-led fire points. Helpful where equipment must not be removed unnoticed.
For a practical material option, use dry powder fire extinguisher polyester signs in everyday work areas. Good when several signs need a consistent look.
To compare packs with individual formats, browse powder extinguisher signs for multiple fire points. Useful when planning a full building refresh.
Estimated Delivery Day
Current date and time:
Estimated delivery by:
Based on an estimated 3 working day delivery timeframe from today, excluding weekends and bank holidays. Delivery dates are provided as a guide only and may vary depending on the product ordered, stock availability at the time of purchase, production or printing lead times.