We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
No Parking Polycarbonate Signs
£44.99
In stock
SKU
TRAF965AJAGP
No Parking Polycarbonate Signs help you keep entrances, gates, yards and restricted parking areas clear by giving drivers a clear, durable instruction before vehicles obstruct access.
No Parking Polycarbonate Signs are tough red and white parking restriction signs that help you stop vehicles being left in entrances, yards, private parking areas and service access points. They give drivers a clear instruction before parking causes obstruction, delay or access disputes.
Where No Parking Polycarbonate Signs Should Be Fitted
You should install these signs at eye level near gates, shutter doors, loading entrances, private bays, workshop yards and shared access points. Position them before the parking decision is made, not after the obstruction has already happened.
Viewing Distance Guidance for Clear Driver Control
For best results, fit the sign where an approaching driver can read it before stopping. The 400 x 300mm size suits close-range parking control, especially at gates, fences, walls and garage entrances where decisions are made within several metres.
| Size option | Suggested practical viewing range | Best use |
|---|---|---|
| H 400 x W 300mm | Approx. 6–10 metres | Gates, yards, walls, fences and parking entrances |
What This Sign Helps You Achieve On Site
Once installed in the right position, this sign helps you reduce parking arguments, protect access routes and make the restriction obvious before a driver leaves a vehicle in the wrong place.
✅ Fewer blocked gates, entrances and service doors during busy periods
✅ Clearer parking behaviour from visitors, contractors and staff
✅ Better protection for areas that must remain open for movement or access
No Parking Polycarbonate Sign Specifications
- Sign message: “No parking”
- Purpose: controls unwanted parking
- Sign type: parking restriction
- Material: polycarbonate
- Material thickness: 1.2mm
- Size: H 400 x W 300mm
- Orientation: portrait
- Shape: rectangle
- Background colour: red and white
- Text colour: white
- Pictogram symbols: none shown
- EN ISO 7010 code: not applicable
- BS 5499: design guidance only where relevant
- Finish: glossy film surface
- Photoluminescent: no
- Reflective: no
- Supplied as: single sign
- Where to use: indoors and outdoors
- Fixing methods: wall, fence, garage door, door or gate mount
- Fixings: available separately
Practical Fitting Advice for No Parking Polycarbonate Signs
❌ Placement Errors That Weaken The Message
❌ Fitting it too low behind parked vehicles
❌ Placing it after the point where drivers stop
❌ Hiding it among other signs or visual clutter
❌ Situations Where This Sign May Not Be Enough
❌ Do not rely on it alone for legally controlled public roads
❌ Do not use it where a reflective sign is needed at night
❌ Do not fit it to dirty, unstable or damaged surfaces
✅ Better Fitting Choices For Lasting Results
✅ Mount it facing approaching vehicles before the parking point
✅ Use secure fixings suited to the wall, gate, fence or door
✅ Keep the sign clean and unobstructed so the message stays visible
No Parking Polycarbonate Signs Questions Answered
What are No Parking Polycarbonate Signs used for? They are used to tell drivers not to leave vehicles in areas where access, movement or safety could be affected.
Is polycarbonate a good choice for outdoor parking signs? Yes, polycarbonate is a strong option where the sign may face weather, knocks or frequent contact around gates, yards and entrances.
Can this sign be used on a private driveway or business entrance? Yes, it is suitable for private premises, commercial entrances, shared access points, service yards and garage doors where you need a clear restriction.
Does this sign include an EN ISO 7010 pictogram code? No specific EN ISO 7010 pictogram code applies because this design uses a text message rather than a standard safety pictogram.
Will this make parking restrictions legally enforceable? It helps communicate your restriction clearly, but legal enforcement depends on your site rules, land control arrangements and any local authority requirements.
No Parking Polycarbonate Signs Features and Benefits
Features
- ✓ Polycarbonate construction for demanding parking areas
- ✓ Red background with white “No parking” wording
- ✓ H 400 x W 300mm portrait format for clear placement
- ✓ Glossy non-reflective surface for everyday visibility
Benefits
- ✓ Helps you deter vehicles before they block access
- ✓ Makes restrictions easy for drivers to understand quickly
- ✓ Suits entrances, gates and yards exposed to daily use
- ✓ Supports calmer parking control with fewer disputes
Durable no parking sign materials to review
For another durable option, compare aluminium no parking signs for outdoor use where long-term display matters. Useful for car parks, yards and exposed entrances.
If you want an aluminium prohibition format, choose aluminium prohibition no parking signs for a tougher fixed sign. They suit workplaces and premises needing a more permanent message.
For a pack option, use six pack no parking prohibition signs where several matching points need marking. Helpful for larger sites with repeated parking restrictions.
Where towing wording is more important than material choice, consider tow-away no parking warning signs for firmer driver control. Useful for private parking spaces and restricted access areas.
To compare materials and wording, browse durable no parking sign options across the full category. This helps you select a sign that matches both location and message strength.
Estimated Delivery Day
Current date and time:
Estimated delivery by:
Based on an estimated 3 working day delivery timeframe from today, excluding weekends and bank holidays. Delivery dates are provided as a guide only and may vary depending on the product ordered, stock availability at the time of purchase, production or printing lead times.